Page History

...

Another essential condition to verify is whether a sufficient number of iterations were performed in obtaining the solution (i.e if the solution converged). The figure below shows how the solution behaves after 5000 3000 iterations. As you can see, the residuals do not change much between 1500 and 5000 iterations and so this 3000 iterations. This is why 1500 iterations was deemed appropriate for the solution was deemed to have converged at 1500 sake of this tutorial, considering the reduction in solving time. The solution, however, does appear to converges better after 3000 iterations. 

Image Added

Finally, it is crucial to perform a mesh refinement study. A finer mesh can help achieve a more precise solution of the model but is more computationally expensive. A CFD analyst thus has to gauge what mesh size will provide a decently accurate solution at a reasonable computing cost. This is of course very dependent on the desired accuracy of results and the application of the project. 

The following table demonstrates how the results change with a greater number of cells. It is it quite clear that the mesh created in the tutorial is not sufficient in obtaining a sufficiently accurate solution. 

Image Added

These results were obtained with the following mesh settings: 

Validation

...