Numerical Results

Deformed Shape

The following video shows how to plot the deformed shape and use it to check if the displacement constraints have been applied correctly.

<iframe width="600" height="338" src="//www.youtube.com/embed/yVtxuL9Nxy8?rel=0" frameborder="0" allowfullscreen></iframe>

Summary of the above video:

Under the tree, highlight Solution

Select Deformation > Total Deformation

Solve

{latex} {\bf $\sigma_x$}{latex}

Contours

We next take a look at

{latex} $\sigma_x${latex}

variation in the model.

<iframe width="600" height="338" src="//www.youtube.com/embed/35YXCKqC1Ng?rel=0" frameborder="0" allowfullscreen></iframe>

Summary of the above video:

Under the tree, highlight Solution

Select Stress > Normal Stress

Check that it is in the X direction and rename to sigma_x

Solve

You can save an image of the contours to a file using the instructions below.

<iframe width="600" height="338" src="//www.youtube.com/embed/4PGJ90-lg0o?rel=0" frameborder="0" allowfullscreen></iframe>

Below, we take a closer look at the

{latex} $\sigma_x${latex}

variation on the front face and compare it to what we expect from beam bending theory.

<iframe width="600" height="338" src="//www.youtube.com/embed/1YSyadkkzms?rel=0" frameborder="0" allowfullscreen></iframe>

We interrogate

{latex} $\sigma_x${latex}

variation in the interior of the model using "section planes".

<iframe width="600" height="338" src="//www.youtube.com/embed/YM_YUta3-78?rel=0" frameborder="0" allowfullscreen></iframe>

{latex} ${\bf \sigma_x}${latex}

along a Line using "Path" Operations

First, we create two coordinate systems which we'll use to define the start and end points of the line.

<iframe width="600" height="338" src="//www.youtube.com/embed/R-w8mA2MzSk?rel=0" frameborder="0" allowfullscreen></iframe>

Second, we create the desired line on the front face.

<iframe width="600" height="338" src="//www.youtube.com/embed/dDPSyw6dNXE?rel=0" frameborder="0" allowfullscreen></iframe>

Last, we extract

{latex} $\sigma_x${latex}

along the line and export the results to an Excel file.

<iframe width="600" height="338" src="//www.youtube.com/embed/kJfABDOVfIo?rel=0" frameborder="0" allowfullscreen></iframe>

Go to Step 7: Verification & Validation

Go to all ANSYS Learning Modules