Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

  1. Reports
    1. Fluxes
      1. Select mass flow rate
      2. Select inlet, outlet and top-inlet
    2. Look at the net results value and check if it makes sense, if mass is balanced
  2. Plot
    1. Set-Up
      1. Click Add
      2. Find file with .out extension
      3. Click plot
      4. Click axis
        1. Select y
        2. Uncheck auto range
        3. Change min to -200,000 Pa
        4. Change max to 200,000 Pa
        5. Click apply
      5.  Click Plot
      6. Try a range from -100,000 to 0 Pa in the y axis. 
      7. Try a range from -7000 to -8000 Pa in the y axis

...

Graphical Instances

Let's now go in CFD-Post for the remaining numerical results. We'll start by enabling the visualization of a full 3 blade rotor. 

HTML
<iframe width="640" height="360" src="//www.youtube.com/embed/M4_YItFbhsk" frameborder="0" allowfullscreen></iframe>

...

Summary of steps in the above video:

  1. Open CFD post
  2. Show three blades
    1. Double-click fluids to access the details of fluid toolbox
    2. Change the number of graphical instances to 3
    3. Make sure apply rotation is selected and that its defined to rotate about the z axis
    4. Change the instance definition to Custom
    5. Enable full circle
    6. Click apply
  3. Change blade color to white
    1. Click on blade surface and change color to white

...

Blade Velocity

The following video will show you how to find blade velocity at different radii. 

HTML
<iframe width="640" height="360" src="//www.youtube.com/embed/il58JvXEu-I" frameborder="0" allowfullscreen></iframe>

Summary of steps in the above video:

 

  1. Insert vectors 
    1. Name it blade velocity, 
    2. Location: Blade
    3. Variable: velocity in stn frame
    4. Click Apply
  2. See that there’s too many lines, change sampling to equally space and click 500, apply
  3. Look at the max velocity 

 

...

Velocity Streamlines

Let's now visualize the flow around the turbine using velocity streamlines. 

HTML
<iframe width="640" height="360" src="//www.youtube.com/embed/_qjNCL288j4" frameborder="0" allowfullscreen></iframe>

Summary of steps in the above video:

  1. Click on the streamline button and leave the name as velocity streamline
    1. Start from: click the 3 dots next to inlet and select inlet and outside inlet
    2. Change the number of points to 200
    3. Variable: Velocity in Stn frame
    4. In the color tab, change the range from global to user specified and put min=9m/s and max=13m/s. 
    5. Click Apply

...

Pressure Contour

Next up, we'll look at the pressure distribution on the blade surface. 

HTML
<iframe width="640" height="360" src="//www.youtube.com/embed/YoaZsYvynIw" frameborder="0" allowfullscreen></iframe>

 

Torque

Summary of steps in the above video:

  1. Add contour, name it pressure contour
    1. Choose pressure
    2. Change # of contours to 110
    3. Go in render and uncheck lighting

...

Torque

Let's now find the torque that the fluid is generating on the blade. 

Under Construction
HTML
<iframe width="640" height="360" src="//www.youtube.com/embed/xoJp4HnIht8" frameborder="0" allowfullscreen></iframe>
Note

Summary of steps in the above video:

  1. Finding torque in CFD Post
    1. Click calculator tab
    2. Click Function calculator
    3. Select torque under function
    4. Select Blade surface under location
    5. Change axis to Z
    6. Calculate
  2. Finding torque in FLUENT (more detailed)
    1. Reports
      1. Forces
      2. Moment
      3. About z
      4. Apply


Go to Step 7: Verification & Validation

...