Page History

...

{html}<iframe width="640" height="360" src="//www.youtube.com/embed/mOGunpQL-00" frameborder="0" allowfullscreen></iframe>{html}

Summary of steps in the above video:

1. Upwind sketch
   1. Select xy coord, new plane, offset z of 90m, generate
   2. New Sketch
   3. Make sure auto constraints cursor is selected
   4. Use arc by center tool
   5. Use line tool
   6. Dimensions angles to 60 degree each
   7. Dimension radius to 120 meters
2. Downwind sketch
   1. Same thing but place it 180 meters behind
   2. twice the radius, so 240 meters
3. Skin
   1. Click skin, select both sketches
   2. Specify add material
4. Name this body, fluid, and specify that it’s a fluid

...

Creating the Fluid Volume

...

{html}<iframe width="640" height="360" src="//www.youtube.com/embed/05vgSbkJnJU" frameborder="0" allowfullscreen></iframe>{html}

Summary of steps in the above video:       

1. Boolean subtract
   1. Click Boolean, select target body to be the fluid body and tool body to be the blade
2. Show the blade inside with wireframe view

Go to Step 3: Mesh

...