Page History

{include: ANSYS Google Analytics}
{include: Bike Crank - Panel}

h1. Numerical Results

h3. Deformed Shape

The following video shows how to plot the deformed shape and use it to check if the displacement constraints have been applied correctly.
\\
{html}<iframe width="600" height="338" src="//www.youtube.com/embed/yVtxuL9Nxy8?rel=0" frameborder="0" allowfullscreen></iframe>{html}
\\

h3. {latex} {\bf $\sigma_x$}{latex} Contours

We next take a look at {latex} $\sigma_x${latex} variation in the model.
\\
{html}<iframe width="600" height="338" src="//www.youtube.com/embed/35YXCKqC1Ng?rel=0" frameborder="0" allowfullscreen></iframe>{html}
\\

You can save an image of the contours to a file using the instructions below.
\\
{html}<iframe width="600" height="338" src="//www.youtube.com/embed/4PGJ90-lg0o?rel=0" frameborder="0" allowfullscreen></iframe>{html}
\\

Below, we take a closer look at the {latex} $\sigma_x${latex} variation on the front face and compare it to what we expect from beam bending theory.
\\
{html}<iframe width="600" height="338" src="//www.youtube.com/embed/1YSyadkkzms?rel=0" frameborder="0" allowfullscreen></iframe>{html}
\\

We interrogate {latex} $\sigma_x${latex} variation in the interior of the model using "section planes".
\\
{html}<iframe width="600" height="338" src="//www.youtube.com/embed/YM_YUta3-78?rel=0" frameborder="0" allowfullscreen></iframe>{html}
\\

h3. {latex} ${\bf \sigma_x}${latex} along a Line using "Path" Operations

First, we create two coordinate systems which we'll use to define the start and end points of the line.
\\
{html}<iframe width="600" height="338" src="//www.youtube.com/embed/R-w8mA2MzSk?rel=0" frameborder="0" allowfullscreen></iframe>{html}
\\

Second, we create the desired line on the front face.
\\
{html}<iframe width="600" height="338" src="//www.youtube.com/embed/MW2jSeEfHpwdDPSyw6dNXE?rel=0" frameborder="0" allowfullscreen></iframe>{html}
\\

Last, we extract {latex} $\sigma_x${latex} along the line and export the results to an Excel file.
\\
{html}<iframe width="600" height="338" src="//www.youtube.com/embed/kJfABDOVfIo?rel=0" frameborder="0" allowfullscreen></iframe>{html}
\\

\\
[*Go to Step 7: Verification & Validation*|Bike Crank - Verification & Validation]

[Go to all ANSYS Learning Modules|ANSYS Learning Modules]\\
\\