...

Assemble and Solve Global System

Select Static under the Solver menu. This assembles and solves the global matrix. Verify that under Current Settings, the software reports Displ. done. Let's take a look at the nodal displacement values to check that they look plausible.

Nodal Displacements

Under Plotting, select Displacement. The nodal displacements are shown below.

...

Are the displacement boundary conditions at A and B satisfied? The displacement is largest in the middle section of the beam. Is this what you'd expect?

Deformed Mesh

Let's take a peek at how the elements have deformed under the applied vertical loads. Under Plotting, select Deformed mesh. Enter 1000 for the magnification factor and click OK.
Since the nodal displacements look plausible, let's take a peek at stresses and isochromatic fringes. This will occupy us in step 5.

Go to Step 5: Post-process Process the solutionSolution

Go to all MATLAB Learning Modules