Page History

...

Right click on model button, , in the Workbench window then click on Edit... as shown below.


Expand "Model (A4)", , if it is not already expanded.

Assign

...

Cornellian to

...

the Beam

The material Cornellium Cornellian that was created earlier needs to be applied to the beam. In order to do so, expand Geometry, . Next, click once on Line Body, , which will appear underneath Geometry. Then expand Material which is located under Details of Line Body. Then click on the arrow on the far right and change the specified material to Cornellium Cornellian as shown below. Now ANSYS will use the correct Young's Modulus while forming the element stiffness matrices.

Specify the Element Size

...