...

...

Author: John Singleton, Cornell University

Problem Specification
1. Pre-Analysis & Start-Up
2. Geometry
3. Mesh
4. Setup (Physics)
5. Solution
6. Results
7. Verification and Validation
Exercises

...

Geometry

Attach Geometry from Cantilever to Cantilever Modal

The geometry for the "Cantilever Beam Modal Analysis" tutorial is the same as the geometry for the "Cantilever Beam" tutorial. Instead of recreating the geometry, we will simple attach the geometry from the Static Structural Analysis System (Cantilever) to the Modal Analysis System (Cantilever Modal). In order to attach the geometry, (left click) Geometry in the "Cantilever" project and drag it to Geometry in the "Cantilever Modal" project, as shown below.

...

https://confluence.cornell.edu/download/attachments/145756992/SharedGeometry_Full.png

Save

Go to Step 3: Mesh
See and rate the complete Learning Module

Go to all ANSYS Learning Modules