Page History

...

The desired mesh has specific number of divisions along the radial and the axial direction. In order to obtain the specified number of divisions Edge Sizing must be used. The divisions along the axial direction will be specified first. Now, an Edge Sizing needs to be inserted. First, (Click) Mesh Control > Sizing as shown below. 

Now, the geometry and the number of divisions need to be specified. First (Click) Edge Selection Filter, , in the upper toolbar. Hold down the "Ctrl" button and then click the edges AF and BG. Both sides should highlight green. Next, hit Apply under the Details of Sizing table as shown below. 

...