Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Comment: Migrated to Confluence 4.0

Maithili Gokarn's Individual Contribution Page

Fall 2013 Contributions

This semester I am a member of the Anaerobic Wastewater Treatment team.
  •  Reviewed existing literature and research from the summer . 
  • Familiarized self with the use of measurement equipments and techniques like Gas Chromatography and Spectrophotometer , by conducting regular gas ,influent and effluent sampling . 
  •  Learnt the use of Process Controller software . 
  • Reactor construction-cutting  and drilling holes in pipes to fit reactor specifications,threaded the pipe holes and fit the pipes with fittings using plumber's tape. 
  • Set up of  the newly constructed reactors by placing them on the stands , attaching the required tubings,valves and pressure sensors , testing the solenoid valves using Process Controller and fixing the pumps to the reactors .
  • Conducted tests to characterize the relationship between upflow velocity and bed expansion in order to more accurately control the size of the particle beds in the AFBR reactors
  •  Inoculation of 6 six reactors and  addition of media to the AFBR reactors.
  • Data Analysis 

Spring 2014 Contributions

This semester I am again a member of the Anaerobic Wastewater Treatment team.

This semester we have divided the team into three sub-teams  ,based on our work  and results obtained in the fall semester .The three groups are -UASB Team, Aerobic Treatment Team and the Reactor Modification Team. I am a part of the UASB team. 

  • Last semester the actual methane produced by our reactors was relatively lesser than the theoretically produced methane.
  • This semester,changed the process flow such that the UASB receives high strength wastewater resulting in more methane gas production per  gCOD destruction.
  • Developed methods to test gas tightness and  achieve gas tightness by trying different methods- using Teflon tape and para film , change plastic tubing to copper tubing , and finally using epoxy glue on the fittings .
  • Developed new frequency of sampling and added pH tests to sampling parameter.