...
This completes the problem specification. Save your project.
Setup Data Export
In addition to the standard data quantities, we would also like to view the results for the Skin Friction Coefficient. This quantity is not transferred to the post-processor by default; so we have to do it manually.
File > Data File Quantities
Under Additional Quantities, select Skin Friction Coefficient, which should be roughly half way down. Your window should now look like this:
Iterate Until Convergence
...
We need a larger number of iterations for convergence than in the laminar case since we have a finer mesh and are also solving additional equations from the turbulence model.
Setup Data Export
In addition to the standard data quantities, we would also like to view the results for the Skin Friction Coefficient. This quantity is not transferred to the post-processor by default; so we have to do it manually.
File > Data File Quantities
Under Additional Quantities, select Skin Friction Coefficient, which should be roughly half way down. Your window should now look like this:
Go to Step 6: Results
...