Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

  • Using "Automatic Connections" to connect the crank arm and the gage doesn't always work. An alternate procedure to manually connect the two entities is shown in a later video below.
  • When specifying the edge sizing for the gage, set behaviorBehavior=hard" Hard as in the snapshot below. Otherwise, ANSYS might over-ride your edge setting and you will get more than one element.




    Widget Connector
    width600
    urlhttp://www.youtube.com/watch?v=94o6t-LCzl4
    height370

    An overview of the procedure followed in the video and explanation of the associated steps can be found in this powerpoint presentation from MAE 3272, Spring 2013.

    Our ANSYS Mechanical 14.0 model with a strain gage mounted can be downloaded here for your review. Download the .wbpz file and double-click on it to load it in ANSYS Workbench. To save the file in the usual .wbpj format, select File > Save as. To reduce the file size, the results have not been saved. You'll have to clear all results by selecting (right-click)Results > Clear Generated Data in the project page. Then, re-solve in ANSYS Mechanical (the red M in the taskbar) to see the results.



    Manually Connecting Crank Arm and Gage

...