Sign-up for free online course on ANSYS simulations!| Include Page | ||||
|---|---|---|---|---|
|
| Include Page | ||||
|---|---|---|---|---|
|
This page has been moved to https://courses.ansys.com/index.php/courses/modal-analysis-of-a-monocoque/
Click in the link above if you are not automatically redirected in 10 seconds.
Click in the link above if you are not automatically redirected in 10 seconds.
| Note |
|---|
In order to do this exercise, you must have Ansys ANSYS Composite Prepost PrepPost installed. |
Modal Analysis of a Composite Monocoque
...
One of the beauty of composite material is to customize the ply lay-ups to achieve optimum properties according to the needs. It is often the case where different ply lay-ups are used at different monocoque regions for their specific needs. This exercise has 4 different regions as shown in the above diagram. Details of the composite layup will be explained during the exercise.
What In this module, we will find using ANSYS is calculate torsional displacement . From this, torsional stiffness can be calculated as followswith the use of ANSYS PrepPost and ANSYS Mechanical. Torsional stiffness will then be calculated using the following equations:
Go to Step 1: Pre-Analysis & Start-Up
...