Sarah Stodter

Fall 2010

Summer 2010

In the Summer of 2010, I was awarded an Engineering Learning Initiatives Develop-Your-Own Internship grants, which enabled me to work with the AguaClara team full-time. During this time, I led both the Stacked Rapid Sand Filtration (SRSF) and the Polyurethane Foam Filtration (PFF) teams. Responsibilities included bench-scale experiment design and set-up, fabrication, research, data analysis, and technical reporting and presentation of results. The SRSF research successfully proved the concept of the stacked rapid sand filter design by demonstration of the bench-scale filter's filtration and backwash capabilities. The PFF research continued to delineate the optimal range of operational parameters, including flow rate, influent turbidity, and dose of alum coagulant added to influent turbid water.

Spring 2010

As a founding member of the PFF team, I co-led the team's initial research of the use of polyurethane foam as a filter media. Initial experiments indicated the polyurethane foam was a viable filter media, with the capacity to achieve effluent at or below U.S. drinking water standards under particular conditions. Further research conducted to delineate the optimal range of parameters including including filter pore size, depth, and orientation (vertical vs. horizontal arrangement), and use of alum coagulant. Responsibilities included bench-scale experiment design and set-up, fabrication, research, data analysis, and technical reporting and presentation of results.

January 2009

In January 2009, I had to opportunity to travel to Honduras with members of the AguaClara team, and observe first hand the need and impact of AguaClara plants.

Fall 2009

In the Fall of 2009, I was a student in the CEE 4540: Sustainable Small Scale Drinking Water Supplies design course. My team's Final Capstone Design project proposed the use of polyurethane foam material to filter effluent from sedimentation tank.

...