Page History

{include: ANSYS Google Analytics}
{panel}
Problem Specification
1. Pre-analysis
2. Geometry
3. Mesh
4. Setup (Physics)
*5. Solution*
6. Results
7. Verification and Validation
Exercises
{panel}

h2. Step 5: Solution

{composition-setup}
cloak.toggle.type = none
{composition-setup}
{cloak:id=cloaked}
Highlight each line of the above panel and insert the appropriate links to the other pages of your tutorial

Highlight the bold line at the bottom of the page that read "Go to Step...".  Insert the appropriate link to the next page of your tutorial.

Enter any relevant text, images, and videos in the space under where it says "cloak" below
{cloak}
\\The Solution setup is fairly simple.  We want to find the deformation of the face that is connected to the mirrors, specifically in the Z direction.

First, add in the standard Total Deformation and Equivalent Stress across the entire body. Right click on Solution, Insert>Deformation>Total.  Then, Right click on Solution, Insert>Stress>Equivalent (von-Mises).

Now we will add in the Directional deformation.  Right click on Solution, Insert>Deformation>Directional.  Change the direction to Z, and select the 280 faces using the method discussed before.

!extend.jpg|border=1,width=300!
!directional.jpg|border=1!
The next solutions that we want to concern ourselves with is creating joint probes to discover how the joints deform and move with the rest of the geometry.

Right Click on Solutions, Insert>Probe>Joint.

Under the boundary condition, select a defined joint. !joint probes.jpg|border=1!
Repeat this for each of the joint probes.


*Go to Step 6: Results*
[Go to all ANSYS Learning Modules|SIMULATION:ANSYS Learning Modules]