Page History

...

Submit:

1. Results from design the Design of experiment Experiments step
2. 3D response surface: (R,H) vs. Volume. In other words, plot R on the x-axis, H on the y-axis and Volume on the z-axis. See tip below for how to create such a plot in ANSYS.
3. 3D response surface: (R,H) vs. Max effective stress
4. Selected design point
5. Maximum effective (or Von Mises) stress variation in the plate at the design point

...

To plot the response surfaces, you need to set the x, y and z axes highlighted in the snapshot below. Double-click on Response Surface in the Project Schematic to get to this menu.

Return to: Problem Specification

...