Page History

...

Repeat the optimization problem in the tutorial but with the following four design variables: H, W, R, T (thickness). Use the same Young's modulus and Poisson ratio: 30 x 10^3 ksi and 0.3

Constraints

Maximum effective stress < yield value (32.5 ksi)

...

1. Results from design of experiment setp
2. 3D response surfacessurface: (R,H) vs. V and Volume
3. 3D response surface: (R,H) vs. Max .
3. Effective Stresseffective stress
4. Selected design point
5. Von Mises stress variation in the plate at the design point