Sign-up for free online course on ANSYS simulations!...
You will see Centerline Temperature created under Report in the Outline tab.
| Info | ||
|---|---|---|
| ||
You need to repeat the FLUENT simulation with inputs from YOUR MEASUREMENTS in the lab. To compare the FLUENT results with experiment, you can export the FLUENT result into Excel. A sample comparison is shown below. The experiment data can be downloaded here.
You can export the FLUENT data in Excel format by clicking on the Export button in "Details of centerline temperature"
|
...
Again in this case, the x-axis is the x-position along the pipe and the y-axis denotes temperature.
| Info | ||
|---|---|---|
| ||
You need to repeat the FLUENT simulation with inputs from YOUR MEASUREMENTS in the lab and compare the FLUENT results with experiment. A sample comparison is shown below. The experimental data can be downloaded here. You can export the data by clicking on the Export button, as shown in the previous step. |
...
Our purpose in this exercise is to study the pressure variation along the length of the pipe. Therefore our chart should show pressure in the y-axis and x-position in the x-axis. In this case, our x-axis variable is x and our y-axis variable is pressure.
| Info | ||
|---|---|---|
| ||
You need to repeat the FLUENT simulation with inputs from YOUR MEASUREMENTS in the lab . The experiment data can be downloaded hereand compare the FLUENT results with experiment. A sample comparison is shown below.
You can export the data by clicking on the Export button, as shown in the previous stepspreviously. |
Axial Velocity Profile before and after Heated Section
...