Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

Notice preheat 2 and preheat 3 lines yield almost the same velocity profile. This tells us that after preheat 2, the flow his almost fully developed.

Axial Velocity Profile before and after Heated Section

To make things more interesting, let's now compare the velocity profiles before and after the heated section. To do this, we need to first create lines after heated section

...


 
Now we will specify the X Axis parameter. Click on X Axis tab. Next to Variable, choose Velocity u. Next we will specify the Y Axis parameter. Click on Y Axis tab. Next to Variable, choose Y. Click Apply. You will see First Section Axial Velocity Profile created under Report in the Outline tab.
This is what you should see in the Graphics window.

Image Removed

...

]Image Added|^axial velocity profile2.jpg]

What we notice when comparing fully developed flow before and after heated section is that the flow increases in velocity after the heated section. As air is heated, the density decreases. So the velocity has to increase to maintain the same mass flow rate.

Temperature Profile

Now let's us look at the temperature profile before and after the heating section.

...