...
(Right Click) Mesh > Insert > Sizing
Set Geometry to the top halve half of the bisecting line. Set Type to Number of Divisions, set Number of Divisions to 96 and set Behavior to Hard. Then, set Bias Type to the first option and set Bias Factor to 460.
Radial Edge Sizing 2 (Bottom Half)
(Right Click) Mesh > Insert > Sizing
Set Geometry to the top half of the bisecting line. Set Type to Number of Divisions, set Number of Divisions to 96 and set Behavior to Hard. Then, set Bias Type to the second option and set Bias Factor to 460. Click Update to generate the new mesh.
Go to Step 4: Setup (Physics)
See and rate the complete Learning Module
Go to all FLUENT Learning Modules