Page History

...

Problem Setup > Materials > Fluid > Create/Edit.... Then set the Density to 1 kg/m^3 and set Viscosity to 0.05 kg/m*s. Click Change/Create then click Close.

Boundary Conditions

...

FarField1

...

Problem Setup > Boundary Conditions > farfield1 {}. Set Type to velocity-inlet. Click Edit.... Set Velocity Specification Method to Components, set X-Velocity to 1 m/s, and set Y-Velocity to 0 m/s.

...

FarField2

...

...

Cylinder Wall

...

Go to Step 5: Solution

See and rate the complete Learning Module

Go to all FLUENT Learning Modules