Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

Include Page
FLUENT Google Analytics
FLUENT Google Analytics
Include Page
Unsteady Flow Past a Cylinder - Panel
Unsteady Flow Past a Cylinder - Panel

Numerical Results

Examine Monitors

If we look at our monitor of lift coefficient, we see how the lift coefficient changes with the flow time, becoming periodic due to the vortex shedding from the cylinder. We can use this plot to calculate the Strouhal number of the flow, which is a ratio of the unsteadiness in the flow to inertial forces in the flow field. We can calculate the Strouhal Number by calculating the frequency of the vortex shedding from our plot.

 

Latex
\Large
\begin{equation}
St = \frac{f*D}{U}
\end{equation}

 

Since this flow has D=U=1, the Strouhal Number is simply the frequency of vortex shedding. See the plot of Cl vs. Flow Time below. The timestep of .2 was used for this simulation.

Image Added

Open CFD-Post

We'll create a separate CFD-Post module, as this is the easiest way to load the results for this project.

...

Click OK in the popup window if one appears.h4.

Load Timesteps

Click Tools > Time Step Selector to open the Time Step Selector.

...

Select the first time step, and click Apply. Leave the Time Step Selector window open, but continue to the next step.h4.

Create Vorticity Contour

Now, let's insert a contour of vorticity, in order to animate it.

...

Now we're ready to animate the vorticity contour over this zoomed-in area.h4.

Create Animation

Return to the Time Step Selector Window, which should still be open. Click the Animate Timesteps button.

...