SimCafe

Space shortcuts

Child pages
  • Flat Plate Boundary Layer - Physics Setup

Versions Compared

Old Version 61

changes.mady.by.user user-ab9f4

Saved on

compared with

New Version 62

changes.mady.by.user user-ab9f4

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

For the far_field, set the Boundary Condition Type to symmetry, as shown below.


newwindow
Click Here for Higher Resolution
Click Here for Higher Resolution
https://confluence.cornell.edu/download/attachments/118771050/symmbc_Full.png


In the first dialog box click yes and in the second dialog box leave the name as is and click OK. The symmetry boundary conditions sets the velocities normal to the boundary equal to zero.

...

Operating Pressure

...


First, click on Operating Conditions... as shown in the image below.
Image Removed
newwindowClick Here for Higher ResolutionClick Here for Higher Resolution

https://confluence.cornell.edu/download/attachments/118771050/OpCond_Full.png
As can be seen below, the default operating pressure is 101325 Pa. For this simulation the default value will be used. Thus, close the Operating Conditions... menu.
Image Removed
At this point save your work in the FLUENT Window by clicking the save button, .

Go to Step 5: Solution

See and rate the complete Learning Module

Go to all FLUENT Learning Modules