Page History

...

Here, the skin friction coefficient will be plotted as a function of distance along the plate. First, click on Plots, then double click on XY Plot, as shown below. In the Solution XY Plot menu deselect Write to File, select Position on X Axis, set X to 1 and set Y to 0. Then, set the box located underneath Y Axis Function to Wall Fluxes and set the box below to Skin Friction Coefficient. Next, select plate under Surfaces and deselect any other geometry features. At this point your Solution XY Plot menu should look the same as the following image.

Image Added

https://confluence.cornell.edu/download/attachments/118771111/SolXY3_Full.png

Results > Plots > XY Plot

Change Pressure to Wall Fluxes. Then, change Wall Shear Stress to Skin Friction Coefficient. Under Surfaces, select plate. 

 
Click Plot.
 

 

https://confluence.cornell.edu/download/attachments/118771111/step6_005.png?version=1

...