...
For the far_field, set the Boundary Condition Type to symmetry, as shown below.
newwindow | ||||
---|---|---|---|---|
| ||||
https://confluence.cornell.edu/download/attachments/118771050/symmbc_Full.png |
In the first dialog box click yes and in the second dialog box leave the name as is and click OK. The symmetry boundary conditions sets the velocities normal to the boundary equal to zero.
...
Operating Pressure
...
Problem Setup > Boundary Conditions
> Operating Conditions
First, click on Operating Conditions... as shown in the image below.
newwindow | ||||
---|---|---|---|---|
| ||||
https://confluence.cornell.edu/download/attachments/118771050/OpCond_Full.png |
As can be seen below, the default operating pressure is 101325 Pa. For this simulation the default value will be used. Thus, close the Operating Conditions... menu.
Use the default value. Click OK.
Go to Step 5: SolutionPre-Analysis and Start-up
See and rate the complete Learning Module
Go to all FLUENT Learning Modules