...
Outlet Boundary Condition
First, (Click) Boundary Conditions > outlet > Edit... as shown in the image below.
newwindow | ||||
---|---|---|---|---|
| ||||
https://confluence.cornell.edu/download/attachments/118771050/editout_Full.png |
Note that the Boundary Condition Type should have been automatically set to pressure-outlet. For the outlet boundary condition the gauge pressure needs to be set to zero. The default gauge pressure is zero, thus no changes need to be made. Close the Pressure-Outlet menu.
Plate Boundary Condition
...
The Boundary Condition Type should have been automatically set to wall, as shown in the image below.
newwindow | ||||
---|---|---|---|---|
| ||||
https://confluence.cornell.edu/download/attachments/118771050/WallBCC_Full.png |
If the Boundary Condition Type is not set to wall, then set it to wall. We will use the default setting for the wall boundary condition, thus no changes are needed.
Far-Field Boundary Condition
...