...
In order to start the process (Click) Boundary Conditions > inlet > Edit... as shown in the following image.
newwindow |
---|
| Click Here for Higher Resolution |
---|
| Click Here for Higher Resolution |
---|
|
https://confluence.cornell.edu/download/attachments/118771050/InletBC_Full.png |
Note that the
Boundary Condition Type should have been automatically set to
velocity-inlet. Now, the velocity at the
inlet will be specified. In the
Velocity Inlet menu set the
Velocity Specification Method to
Components, and set the
AxialX-Velocity (m/s) to 1 m/s, as shown below
. Image Addednewwindow |
---|
| Click Here for Higher Resolution |
---|
| Click Here for Higher Resolution |
---|
|
https://confluence.cornell.edu/download/attachments/118475240/SetInletBC_Full.png |
newwindow |
---|
| Click Here for Higher Resolution |
---|
| Click Here for Higher Resolution |
---|
|
https://confluence.cornell.edu/download/attachments/118475240/VelMenu_Full.png |
Then, click
OK to close the
Velocity Inlet menu.
...