...
In order to start the process (Click) Boundary Conditions > inlet > Edit... as shown in the following image.
newwindow | ||||
---|---|---|---|---|
| ||||
https://confluence.cornell.edu/download/attachments/118475240118771050/BCInletEditInletBC_Full.png |
Note that the Boundary Condition Type should have been automatically set to velocity-inlet. Now, the velocity at the inlet will be specified. In the Velocity Inlet menu set the Velocity Specification Method to Components, and set the Axial-Velocity (m/s) to 1 m/s, as shown below.
newwindow | ||||
---|---|---|---|---|
| ||||
https://confluence.cornell.edu/download/attachments/118475240/VelMenu_Full.png |
Then, click OK to close the Velocity Inlet menu.
...