Page History

...

This particular optimization problem has two output parameters: the maximum Von Mises stress and the volume of the quarter plate. In order to specify the two output parameters, first (Open) Mechanical > (Expand) Geometry > (Highlight) Surface Body. In the "Details of "Surface Body"" table expand Properties then check the box to the left of Volume. A "P" should now be located within the box. Now, the maximum Von Mises Stress will be specified as an output parameter. In order to do so, (Expand) Solution > (Highlight) Equivalent Stress. In the "Details of "Equivalent Stress"" window under Results check the box to the left of Maximum.

...