Page History

...

At this point a cross sectional area will be assigned to the frame elements. Click on "Concept", then click on "Cross Section" and lastly click on "Rectangular" as shown below.


Now, specify the base and height of the cross section. The height and the base both have a length of 0.346m.


At this point, the cross section will be assigned to the line body. First, expand "1 Part, 1 Body", Image Added, then click on "Line Body", Image Added, until it is highlighted. At this point the cell to the right of "Cross Section" in the "Details" table should be highlighted yellow. Click on the arrow at the right side of the yellow cell and choose "Rect1" as shown below.
Image Added

Go to Step 3: Mesh

See and rate the complete Learning Module

...