Page History

...

At this point a line body will be assigned to each segment of the sketch. Click on "Concept" then click on "Lines From Sketches" as shown below.


Now click on "Sketch 1", , and then click the "apply" button, which should be within the "Details of Line 1" table. Now, click on the "Generate" button, , and the line body will be created.

Cross Section

At this point a cross sectional area will be assigned to the frame elements. Click on "Concept", then click on "Cross Section" and lastly click on "Rectangular" as shown below.
Image Added

Now, specify the base and height of the cross section. The height and the base both have a length of 0.346m.
Image Added

Go to Step 3: Mesh

See and rate the complete Learning Module

...