##### Child pages
• Plane Frame - Numerical Results

# Page History

## Key

• This line was removed.
• Formatting was changed.

Include Page

...

 Plane Frame - Panel

...

 Plane Frame - Panel
Include Page

...

...

## 6. Results

If you have followed the instructions in this tutorial you should obtain the following results.

#### Deformation

Total Deformation
Image Removed

...

https://confluence.cornell.edu/download/attachments/127118969/TotalDeformation_Full.png

...

https://confluence.cornell.edu/download/attachments/127118969/XDeformation_Full.png

...

https://confluence.cornell.edu/download/attachments/127118969/YDeformationFull.png

#### Stresses

Direct Stress
Image Removed

...

https://confluence.cornell.edu/download/attachments/127118969/DirectStress_Full.png

...

https://confluence.cornell.edu/download/attachments/127118969/MinimumBendingStress_Full.PNG


# Numerical Results

Note

Under Construction

...

https://confluence.cornell.edu/download/attachments/127118969/MaximumBendingStress_Full.PNG


...

https://confluence.cornell.edu/download/attachments/127118969/MinimumCombindedStress_Full.PNG


...

https://confluence.cornell.edu/download/attachments/127118969/MaximumCombindedStress_Full.PNG


#### Reaction Forces

Left Support Reaction Force

...

Image Removed

#### Moment Reactions

Left Support Moment Reaction

Image Removed
Right Support Moment Reaction
Image Removed

#### Local Coordinate System

Bending moment and shear force are reported in the local coordinate system. To determine what the local coordinate system is for each element, highlight Solution in the tree and select Coordinate Systems > Element Triads.

Image Removed

Click on Solve and ANSYS will display the local coordinate system for each element. The local x, y and z are shown in red, blue and green (RGB), correspondingly.

Image Removed

#### Shear Force

From the local coordinate systems above, we see that we need the shear force in the local y direction. To get the shear in the local y, highlight Solution in the tree and select Beam Results > Shear Force.

Image Removed

Under Details, change Type to Directional Shear Force.

Image Removed

Click on Solve. This will color each element according to the value of the shear force. To probe the shear values in the graphics window, have ANSYS wrap the cross-section around the line element by going to the main menu and selecting View > Thick Shells and Beams.

Image Removed

Select Probe in the main menu. You can hover over the structure to see the value of the shear force. If you click at a point, it will add a label at that point showing the value.

Image Removed

Go to all ANSYS Learning Modules