Page History

...

The beam deformation can be animated by clicking on the play button, , which is located underneath the beam deformation results.

Maximum Bending Stress

For this static structural problem, the maximum bending stress is of interest. In order to examine the maximum bending stress first expand the Beam Tool folder, Image Added, which is located under "Solution(A6)". Next, click on the Maximum Bending Stress button, Image Added. If you have used only two elements you should obtain the following output.
Image Added.
If you have used ten elements for your mesh you should get the output below.
Image Added
 
Go to Step 7: Verification & Validation

...

Go to all ANSYS Learning ModulesImage Removed!10elemtotaldef.png!Image Added