...
...
...
Include Page |
---|
| ANSYS Google Analytics |
---|
| ANSYS Google Analytics |
---|
|
Verification & Validation
...
Verification
...
Steps
HTML |
---|
<iframe width="560" height="315" src="https://www.youtube.com/embed/3RMqaGN74Cg" frameborder="0" allowfullscreen></iframe> |
Check Equilibrium
HTML |
---|
<iframe width="560" height="315" src="https://www.youtube.com/embed/FlM9BMQARSM" frameborder="0" allowfullscreen></iframe> |
Check Mesh Dependence
HTML |
---|
<iframe width="560" height="315" src="https://www.youtube.com/embed/GNpoYKqrCTI" frameborder="0" allowfullscreen></iframe> |
Go to Exercises
Verification of Maximum Bending Stress and Maximum Total Deformation
The ANSYS results will be verified by comparing them to the results obtained using Euler-Bernoulli beam theory in the pre-analysis. The ANSYS simulation outputted 4.6352MPa for the maximum bending stress and the calculation in the pre-analysis yielded 4.635 MPa. The ANSYS simulation outputted 0.0051352m for the total deformation of the beam at x=4 while the calculation from the pre-analysis yielded 0.005103m. The ANSYS results very closely match the calculations from the pre-analysis, thus the simulation has been verified.
Go To Exercises
See and rate the complete Learning Module
Go to all ANSYS Learning Modules
...