...

...

...

Verification & Validation

...

Verification

...

Steps

<iframe width="560" height="315" src="https://www.youtube.com/embed/3RMqaGN74Cg" frameborder="0" allowfullscreen></iframe>

Check Equilibrium

<iframe width="560" height="315" src="https://www.youtube.com/embed/FlM9BMQARSM" frameborder="0" allowfullscreen></iframe>

Check Mesh Dependence

<iframe width="560" height="315" src="https://www.youtube.com/embed/GNpoYKqrCTI" frameborder="0" allowfullscreen></iframe>

Go to Exercises

Verification of Maximum Bending Stress and Maximum Total Deformation

The ANSYS results will be now verified by comparing to the following results obtained using the Euler-Bernoulli beam theory in the pre-analysis.
The ANSYS simulation outputed 4.6352MPa which is very close to the results from the Euler-Bernoulli beam theory. Thus, the maximum bending stress has been verified.

Return to Problem Specification

See and rate the complete Learning Module

Go to all ANSYS Learning Modules

...