Page History

...

Left click (and hold) on Fluid Flow (FLUENT), and drag the icon into the empty space in the Project Schematic.  Here's what you get:

 
Since we selected Fluid Flow(FLUENT), each cell of the system corresponds to a step in the process of performing CFD analysis using FLUENT.  Rename the project to Laminar Pipe.
 
We will work through each step from top down to obtain the solution to our problem.
 
In the Project Schematic of the Workbench window, right click on Geometry and select Properties.  You will see the properties menu on the right of the Workbench window.  Under Advance Geometry Options, change the Analysis Type to 2D.
 

 
 In the Project Schematic, double left click on Geometry to start preparing the geometry.  After you launch the web tutorials and FLUENT, you will have to drag the browser window to the width of the largest image (about 350 pixels).  to make best use of screen real estate, move the windows around and resize them so that you approximate

https://confluence.cornell.edu/download/attachments/111221570/ScreenOrientation.PNG

...

Now that we have the sketch done, we can create a surface for this sketch.

Concept>Surfaces From Sketches

This will create a new surface SurfaceSK1. Under Details View, select Sketch1 as Base Objects and click Apply. Finally click Generate to generate the surface.

...