Page History

...

Outline > Mesh > Insert > Sizing
In the Graphics window, select all the top and bottom edge of the geometry (press Ctrl + mouse click to multiple select). Under Details of "Edge Sizing", click Apply next to Geometry. Enter 0.03 for Element Size (this will give us roughly 200 divisions). Next to Behaviour, change Soft to Hard (This is to overwrite the sizing function employed by ANSYS Mesher. Try meshing with soft behavior and see what you get).

We have specified all the meshing conditions. Click Update on the third menu to see the mesh (Note: disregard the inch unit appear next to the element size. This is recording error. The unit should be in meter).

Click on Mesh and look under Details of "Mesh", next to Statistics, you should see that we have 6120 Elements for our mesh.

...