h3. General Program Information
\\
{float:left\|border=2px solid black}
[!sw iso floc whole.bmp|width=450px!|AutoCAD Channel Program]
Southeast Isometric View
{float}
\\
[Inputs Needed to Call the Flocculation Tank Program|AutoCAD Floc Called Inputs]
[Inputs Defined Within the Flocculation Tank Program|AutoCAD Floc Defined Inputs]
h3. Technical Program Outline
[Floctanktankscript|AutoCAD Flocculation Tank Program - Floctanktankscript] draws the outside walls of the flocculation tank, in addition to the inner walls that separate the channels and the ports that connect them.
\\
\\
[Floctankchannelopeningscript|https://confluence.cornell.edu/display/AGUACLARA/Floctankchannelopeningscript] draws the port that connects the entrance tank to the floc tank (incoming water).
\\
\\
{float:left|border=2px solid black}
[!view of floc ports.bmp|width=450px!|AutoCAD Channel Program]
Floc Ports
{float}
\\
\\
[Flocchannelslotscript|https://confluence.cornell.edu/display/AGUACLARA/AutoCAD+Flocculation+Tank+Program+-+Flocchannelslotscript] draws the slots in the floctankwall into which the baffles are slid.
\\
\\
{float:left|border=2px solid black}
[!top floc tank w slots.bmp|width=800px!|AutoCAD Channel Program]
View of Channel Slots
{float}
\\
\\
[Floctankbafflescript|https://confluence.cornell.edu/display/AGUACLARA/AutoCAD+Flocculation+Tank+Program+-+Flocktankbafflescript] draws the baffles in each channel.
\\
\\
{float:left|border=2px solid black}
[!ne iso floc w baffles.bmp|width=800px!|AutoCAD Channel Program]
View of Baffles within Floc Tank
{float}
\\
\\
[Floctankbaffleportscript|https://confluence.cornell.edu/display/AGUACLARA/AutoCAD+Flocculation+Tank+Program+-+Floctankbaffleportscript] draws ports on alternating sides of the lower baffles through which the water will flow when the floc tank is drained
\\
\\
{float:left|border=2px solid black}
[!sw iso floc w ports.bmp|width=800px!|AutoCAD Channel Program]
SW Isometric View of Ports Within Floctank
{float}
\\
\\
[Floctankdraincouplingscript|https://confluence.cornell.edu/display/AGUACLARA/AutoCAD+Flocculation+Tank+Program+-+Floctankdraincouplingscript] draws couplings into every other channel (as well as the channel closest to the entrance tank).
\\
\\
{float:left|border=2px solid black}
[!sw iso floc w coupling.bmp|width=800px!|AutoCAD Channel Program]
Couplings in the Floctank Wall
{float}
\\
\\
[Floctankdrainvalvescript|https://confluence.cornell.edu/display/AGUACLARA/AutoCAD+Flocculation+Tank+Program+-+Floctankdrainvalvescript] inserts a valve aligned with every coupling.
\\
\\
{float:left|border=2px solid black}
[!sw iso floc w valves.bmp|width=800px!|AutoCAD Channel Program]
Valves outside of the Floctank
{float}
\\
\\
[Floctankdrainslopescript|https://confluence.cornell.edu/display/AGUACLARA/AutoCAD+Flocculation+Tank+Program+-+Floctankdrainslopescript] draws slopes into the floor of the floctank.
\\
\\
{float:left|border=2px solid black}
[!floc tank slopes.bmp|width=750px800px!|AutoCAD Channel Program]
Slope in Bottom of Floctank
{float} | 