Include Page | ||||
---|---|---|---|---|
|
Include Page | ||||
---|---|---|---|---|
|
Model Setup
Specify Boundary Value Problem
HTML |
---|
<iframe width="560" height="315" src="https://www.youtube.com/embed/VtulnpTDax0" frameborder="0" allow="accelerometer; autoplay; encrypted-media; gyroscope; picture-in-picture" allowfullscreen></iframe> |
Go to Step 5: Numerical Solution
Go to all FLUENT Learning Modules
Panel |
---|
Author: John Singleton and Rajesh Bhaskaran, Cornell University Problem Specification |
Note | ||
---|---|---|
| ||
This page of this tutorial is currently under construction. Please check back soon. |
Info | ||
---|---|---|
| ||
Click here for the FLUENT 6.3.26 version. |
Step 4: Setup (Physics)
...
Launch Fluent
...
https://confluence.cornell.edu/download/attachments/118475240/DoublePrecision_Full.png
...
Check and Display Mesh
...
https://confluence.cornell.edu/download/attachments/118771050/MeshDispMenu_Full.png
...
Define Solver Properties
...
https://confluence.cornell.edu/download/attachments/118771050/EnergyModel_Full.png
...
https://confluence.cornell.edu/download/attachments/118771050/ViscModel_Full.png
...
Define Material Properties
...
https://confluence.cornell.edu/download/attachments/118771050/CreateFluid_Full.png
...
https://confluence.cornell.edu/download/attachments/118771050/Mat1_Full.png
...
Define Boundary Conditions
At this point the boundary conditions for the four Named Selections will be specified. The boundary condition for the inlet will be specified first.
...
Inlet Boundary Condition
...
https://confluence.cornell.edu/download/attachments/118771050/InletBC_Full.png
...
https://confluence.cornell.edu/download/attachments/118771050/SetInletBC_Full.png
...
Outlet Boundary Condition
...
https://confluence.cornell.edu/download/attachments/118771050/editout_Full.png
...
Plate Boundary Condition
...
https://confluence.cornell.edu/download/attachments/118771050/WallBCC_Full.png
...
Far-Field Boundary Condition
...
https://confluence.cornell.edu/download/attachments/118771050/symmbc_Full.png
...
Operating Pressure
Problem Setup > Boundary Conditions
> Operating Conditions
Use the default value. Click OK.
Go to Step 5: Solution