Page History

...

https://confluence.cornell.edu/download/attachments/111221576/Axial%20Velocity%20Profile%20after.png

The flow is accelerated in the heated section.

Temperature Profile

Now let's us look at the temperature profile before and after the heating section.

Insert > Chart 
Enter "Temperature Profile" as Name. You will see Details of Temperature Profile appears on the lower left panel. Under General, give the chart Title as "Temperature Profile".
Image Added
 
Now click on Data Series tap to specify the location of the chart data. Create a new data series.  Under Data Source, specify Preheat 3 as Location. Change the name to x=1.8m. Continue adding Data Source until we added all Preheat 3, Postheat 1, Postheat 2, and Outlet. Name them according to the figure shown below. Image Added
 
Now we will specify the X Axis parameter. Click on X Axis tab. Next to Variable, choose Y. Next we will specify the Y Axis parameter. Click on Y Axis tab. Next to Variable, choose Velocity. Click Apply. You will see First Section Axial Velocity Profile created under Report in the Outline tab.
This is what you should see in the Graphics window. Image Added

https://confluence.cornell.edu/download/attachments/111221576/Axial%20Velocity%20Profile%20after.png

The flow is accelerated in the heated section.
 
 

Go to Step 7: Verification & Validation

...