Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

Next, we will name the edges accordingly so that we can specify the appropriate boundary conditions in the later step. We know the bottom edges of the geometry are the centerline of the pipe, the left edge is the inlet of the pipe, the right edge is the outlet of the pipe, top side edges are wall and the top middle edge is the heated wall section. Let's name the edges according to the diagram below.


Select the left edge and right click and select Create Named Selection. Enter Inlet and click OK. Under Outline, you will see the name Inlet under Named Selections.

...