...
Important team member skills:
- MathCAD
- AutoCAD
- Fluid Dynamicscomputer programming
Challenges
CDC
- Work with the team Honduras to evaluate the current linear CDCs at the Tamara and Cuatro Comunidades.
- Need to make the nonlinear mathCAD file more robust.
- Currently input plant flow rate and actual plant flow rate are not the same in the algorithm.
- Extend the range of the design below 6000 L/min. The doser works best at high chemical flow rates with a wide tube. Is there a way to increase chemical flow rates for plant flows below 6000 L/min without overdosing alum? ( e.g. decrease stock concentration- might create huge chemical stock tank however)
...
Rapid Mixer
- Modify the rapid mix mathCAD MathCAD so that the flocculator first section baffle spacing is no longer a constraint on the orifice collector channel width. In other words modify the code so that an aspect ratio (channel width/water depth) is specified rather a fixed depth.
Linear Chemical Dose Controller Paper
- Write and edit paper documenting all the research into the Linear Chemical Dose Controller. The manuscript needs to be suitable for publication. All drafts are attached to the Wiki. Consult with Monroe regularly to ensure completion of manuscript by end of semester. Complete multiple drafts for review and repeat any experiments that may need to be run again to ensure accuracy.