...
Label | Medium Mesh (Original) | Coarse Mesh | Fine Mesh | |
A | Interval Count: 36, Double First Length: 0.5 | Interval Count: 24, Double First Length: 0.7 | Interval Count: 54, Double First Length: 0.3 | |
B | Interval Count: 36, Double First Length: 0.2 | Interval Count: 24, Double First Length: 0.3 | Interval Count: 54, Double First Length: 0.12 | |
C | Interval Count: 30, First Length: 0.1 | Interval Count: 20, First Length: 0.2 | Interval Count: 45, First Length: 0.09 | |
D | Interval Count: 18 | Interval Count: 12 | Interval Count: 27 | |
E | Interval Count: 90, First Length: 0.1 | Interval Count: 60, First Length: 0.15 | Interval Count: 135, First Length: 0.07 | |
F | Interval Count: 36 | Interval Count: 24 | Interval Count: 54 | |
G | Interval Count: 72 | Interval Count: 48 | Interval Count: 108 | |
H | Interval Count: 30 | Interval Count: 20 | Interval Count: 45 | |
I | Interval Count: 36, Double First Length: 0.05 | Interval Count: 24, Double First Length: 0.07 | Interval Count: 54, Double First Length: 0.03
| |
Info | ||
---|---|---|
| ||
You can also change the appropriate parameters (interval count and |
...
...
Info | ||
---|---|---|
| ||
To double the mesh density, the interval count is increased by factor of 1.5. The first length is decreased by a factor of about 1.5. To half the mesh density, the interval count is decreased by factor of 1.5. The first length is increased by a factor of about 1.5. Think about why it is so. |
...