Sign-up for free online course on ANSYS simulations!...
For this purpose, we will create three model with different mesh density. We will create a coarser mesh and a finer mesh and compare all the three meshes together.
For coarse mesh, reduce the mesh density by half of the original mesh. For fine mesh, double the mesh density compared to the original density.
Follow Step 1 through Step 5. At step 2, use the following edge mesh criteria properties instead.
Label | Medium Mesh (Original) | Coarse Mesh | Fine Mesh |
A | Interval Count: 36, Double First Length: 0.5 | Interval Count: 36, Double First Length: 0.5 | Interval Count: 36, Double First Length: 0.5 |
B | Interval Count: 36, Double First Length: 0.2 | Interval Count: 36, Double First Length: 0.2 | Interval Count: 36, Double First Length: 0.2 |
C | Interval Count: 30, First Length: 0.1 | Interval Count: 30, First Length: 0.1 | Interval Count: 30, First Length: 0.1 |
D | Interval Count: 18 | Interval Count: 18 | Interval Count: 18 |
E | Interval Count: 90, First Length: 0.1 | Interval Count: 90, First Length: 0.1 | Interval Count: 90, First Length: 0.1 |
F | Interval Count: 36 | Interval Count: 36 | Interval Count: 36 |
G | Interval Count: 72 | Interval Count: 72 | Interval Count: 72 |
H | Interval Count: 30 | Interval Count: 30 | Interval Count: 30 |
I | Interval Count: 36, Double First Length: 0.05 | Interval Count: 36, Double First Length: 0.05 | Interval Count: 36, Double First Length: 0.05 |
Pressure Coefficient Comparison
...