h1. Linear Flow Orifice Meter
h2. Objective
{float:right|border=2px solid black|width=300px}
!front set-up.JPG|width=300px|height=650px!
{float}
To create an entrance tank and riser pipe that will provide a linaer relationship between the flow rate through the tank and the height of water in the entrance tank. This will allow communication concerning flow rate to be sent to an automated flow control device via a float system to add Alum and Chlorine to the raw water as a function of flow rate through the plant.
Linear Flow Orifice Meter [goals|LFOM Goals], [meeting minutes|Linear Flow Orifice Meter Meeting Minutes], and [wiki map|LFOM Wiki Map].
* A overview of the objective is available in the [Teach-in Presentation|LFOM Teach-in sept 16]
* The current status/accomplishmentsis available in the [Fall 2008 Final Presentation|^final presentation.ppt]
* The scientific paper documenting the research is avaialable [here|LFOM Scientific Paper]
*Team members* [Leah Buerman|leb39]
h2. Linear Flow Orifice Meter Designs for Pre-set Flow Rates
* [link to pre-set flow rate page|LFOM preset designs]
h2. Improved Linear Flow Orifice Meter Design Information
* [link to design information|Improved LFOM Design]
h2. Sutro Weir Approximation Experiment
* [link to approximation experiment|LFOM Sutro Weir Approximation Experiment]
h2. Initial LFOM Concept Design
* [link to concept design|LFOM Initial Concept Design]
| 