Include Page | ||||
---|---|---|---|---|
|
Include Page | ||||
---|---|---|---|---|
|
...
3D Static Force Computation
Created using ANSYS (Version Number)
Learning Goals
In this tutorial, you will learn to:
- (e.g.: Determine the displacements and stresses in a bike crank using 3D FEA capabilities in ANSYS Mechanical)
- (e.g.: Verify the finite-element results from ANSYS by refining the mesh and also comparing with hand calculations)
Note |
---|
Under Construction |
Problem Specification
Note |
---|
Under Construction |
AIM 18.2
Problem Specification
The yoke and center pole shown directly below are made of Steel 1010. The stranded copper coil is excited by a DC current. The coil ampere-turns are 1000, 3000, 4500 and 5000 which is sufficient to saturate the steel. Calculate the magnetic field and electromagnetic force.
Go to Step 1: Pre-Analysis & Start-Up
Go to all ( ANSYS or FLUENT) AIM Learning Modules