SimCafe

Space shortcuts

Child pages
  • ANSYS - Semi-monocoque shell - Step 7

Versions Compared

Old Version 6

changes.mady.by.user user-87699

Saved on

compared with

New Version Current

changes.mady.by.user user-87699

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Comment: Migrated to Confluence 5.3
Panel

Problem Specification
1. Start-up and preliminary set-up
2. Specify element type and constants
3. Specify material properties
4. Specify geometry
5. Mesh geometry
6. Specify boundary conditions
7. Solve!
8. Postprocess the results
9. Validate the results

Step 7: Solve!

Enter Solution Module: Main Menu > Solution

Enter check in the Inputwindow. If the problem has been set up correctly, there will be no errors or warnings reported. You should see the following message in the Output window: The analysis data was checked and no warnings or errors were found.

Main Menu > Solution > Solve > Current LS

Review the information in the /STATUS Command window. Close this window.

Click OK in Solve Current Load Step menu.

ANSYS performs the solution and a window should pop up saying "Solution is done!". Close this window.

Save: Toolbar > SAVE_DB

Go to Step 8: Postprocess the results

...

Copyright 2006.
Cornell University
Sibley School of Mechanical and Aerospace Engineering.

See and rate the complete Learning Module

Go to all ANSYS Learning ModulesANSYS Short Course-Tutorial List