Page History

...

Having access to data regarding floc size and count allows researchers to test the effects of different designs in of certain components of the treatment plant.

Continuous image processing gives users of the application the ability to visualize changes in water quality over a span of seconds, minutes, or even days. 

How does the Floc App work?

The Floc App was made with LabVIEW. Two VI's were created; one takes the images from the camera and the other processes the images. 

During the processing step, a gaussian filter is applied to each image and flocs that are too blurry or on the border of the images are removed. Then,

the size and number of the flocs is determined by utilizing the image processing tools that LabVIEW offers. Processing hundreds or even thousands of 

images over a period of time will give an average size and count of the flocs in the water.

Further information about the essential components of the Floc Size and Count program can be found in Siwei Sun's thesis, attached here, Siwei Sun Thesis.pdf. 

Step-by-step guide to 

1. First, download the executable here: FlocApp.exe
2. Then, download the LabVIEW 2015 run-time engine and follow the steps for proper installation: http://www.ni.com/download/labview-run-time-engine-2015/5507/en/
3. Finally, download the Vision run-time engine and follow the steps for proper installation: http://www.ni.com/download/vision-development-module-run-time-2015-sp1/5973/en/
4. Second, after downloading is complete, simply connect a camera to your computer with a USB cable. 
5. Open up the application on your computer by selecting the icon for the Floc Size and Count ApplicationThe application should open up after it is downloaded. 
6.  Add your camera to the application by clicking on the scroll down bar and selecting your camera's name.

7.  Click on specific configurations that you are interested in having on the interface. Clicking on the following 
   link will elaborate upon the different settings that you can choose. 

   Page propertieshttps://confluence.cornell.edu/display/AGUACLARA/

   Understanding

   +the+

   Settings

   +

   of

   +the+Floc+Application

   Floc Size and Count Application

8. Click

   Start taking images by clicking

   on the "

   Start new selection

   Test" button to start taking images. 

9. Click on the "stop" when you would like Test" button again to stop taking images. 

Tutorials

Before using the Floc Size and Count App for your research, go through the following tutorials. 

...

1. Close the application when you are done analyzing. 

Related articles