Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

In the problem specification, a density and viscosity are defined for the fluid flow that do not match those of the material sample of air. A new material must be defined with the properties that we wish to have. Select Material Assignments and, in the Material drop down menu, choose Create New. In the gas properties window, using the Add drop down menu, select Density and Viscosity. Input the values given in the problem specification for the appropriate properties.

Image Modified

Boundary Conditions / Forces

First, the inlet must be defined using the Fluid Flow Conditions. In the Add drop down menu by Fluid Flow Conditions, select Inlet. Then, using the face selection tool, define the inlet as the plane perpendicular to the top step. Make sure to input the velocity magnitude as 0.4 m/s.

Image Modified

Once the inlet is defined, the outlet is next. In the same drop down menu, define an Outlet at the end of the step. Assign a Gauge static pressure of 0 psi.

Image Modified

Create an opening for the top of the flow volume by selecting Opening in the Add drop down menu. Select the top face of the flow volume and input 0 Pa for the Gauge entrainment pressure.

Image Modified

Add a Symmetry condition from the Add drop down menu to the sides of the flow volume. Do not select the faces at the beginning and end of the steps.

Image Modified

Next, a Wall condition must be added to all surfaces that are not already defined. Wall can be found in the same Add menu as the previous conditions. AIM will automatically create the walls once the option is selected; AIM selects every face that doesn't already have a boundary condition on it.

Image Modified

 

 
Go to Step 5: Results

Go to all ( ANSYS or FLUENT) AIM Learning Modules