Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Comment: Migration of unmigrated content due to installation of a new plugin

Include Page
ANSYS Google Analytics
ANSYS Google Analytics
Include Page
Cantilever Beam Modal Analysis - Panel
Cantilever Beam Modal Analysis - Panel

Geometry

Note

For users of ANSYS 15.0, please check this link for procedures for turning on the Auto Constraint feature before creating sketches in DesignModeler.

Attach Geometry from Cantilever to Cantilever Modal

The geometry for the "Cantilever Beam Modal Analysis" tutorial is the same as the geometry for the "Cantilever Beam" tutorial. Instead of recreating the geometry, we will simple attach the geometry from the Static Structural Analysis System (Cantilever) to the Modal Analysis System (Cantilever Modal). In order to attach the geometry, (left click) Geometry in the "Cantilever" project and drag it to Geometry in the "Cantilever Modal" project, as shown below.

Image Added

newwindow
Higher Resolution Image
Higher Resolution Image
https://confluence.cornell.edu/download/attachments/145756992/ShareGeometry_Full.png


Then release the left mouse button. You should now see that the geometries are shared as shown in the following image.

Image Added

newwindow
Higher Resolution Image
Higher Resolution Image
https://confluence.cornell.edu/download/attachments/145756992/SharedGeometry_Full.png

Save

...

Author: John Singleton and Rajesh Bhaskaran, Cornell University

...


Go to Step 3: Mesh
See and rate the complete Learning Module

Go to all ANSYS Learning Modules